Epoxy.com Product #100 Moisture Disappative Epoxy

Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980
[Contact Us]

Epoxy.com Product #100

Anti-Moisture Entrapment Epoxy


Epoxy.com Product #100 Anti-Moisture (moisture dissipative) Entrapment Epoxy uses a unique epoxy technology which allows the contractor to install epoxy systems on new concrete (4-5 days old) without fear of moisture entrapment. Product #100 Exhibits greater than 100 times the permeability of standard epoxy slurries and mortars. Product #100 is used as a pimer base for Epoxy.com Chip and Quartz systems and as a binder for Epoxy.com Resinous Mortar Systems, when moisture is a concern.


  • High moisture tolerance may reduce moisture transmission
  • Exhibits greater than 100 times the permeability of standard epoxy slurries and mortars
  • Excellent Ultra-Violet stability
  • Bonds well to cool, damp substrates


  • Substrate temperature must be a minimum of 50 degrees F.
  • Substrate must be free of dirt, waxes, curing agents, and other foreign materials


Epoxy Resin, Polyamines, and Fillers


Product #100 is available in Gray.  Special colors available, but minimum quantities and surcharges for special colors may apply. 


Surface Preparation

Surface preparation is the most critical portion of any successful resinous flooring system application. All substrates must be properly prepared as outlined in Epoxy.com Surface Preparation Procedures. Epoxy.com Technical Support Department is pleased to answer any questions.


Installation of Epoxy.com Product #100 varies with application needs. Typically, Product #100 is installed as a slurry with a flat or notched trowel. Spiney rollers are required to de-air mix after spreading. For specific instructions contact Epoxy.com Technical Service Department.


Clean skin with soap and water. Tools and equipment should be cleaned with xylene or lacquer thinner.


12 Square Feet per gallon yields 1/8 inch. 24 Square Feet per gallon yields 1/16 inch.


If the floor becomes slippery due to animal fats, oil, grease, or soap film, clean and rinse thoroughly. Epoxy.com Product #100 is easily cleaned with neutral soaps or detergents. Routine mechanical scrubbing is recommended for all surfaces having a non-skid texture. Waxing is optional. Long periods of heavy traffic may cause wear patterns necessitating a maintenance application of a finish coat.

Technical Data

Viscosity @75 Degrees F 3,500 CPS
Mixing Ratio By Volume: 1 Parts A to 5 Part B
Solids Content 85% by volume
Volatile Organic Content (VOC) -0-
Weight per gallon 11-11.5 pounds per gallon mixed

Cure/Dry Time

Pot Life 45 minutes @ 75 degrees F
Dry to Touch 4-5 hours @ 75 degrees F
Re-Coat 8-12 hours @ 75 degrees F
Light Traffic Overnight
Final Cure
& Maximum Resistance
5 days

Available in 3 gallon units consisting of 0.5 gallons of "A" and 2.5 gallons of B.


Proper mixing and installation is critical to the optimal success of all products.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information please contact:

A Division of Epoxy Systems, Inc
A Vermont Corporation

We have products that have passed the test of time as well as the best new Systems available today.

Since 1980 - 40 years of the highest quality products

Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time)

Closed for lunch from 12Noon to 1PM

321-206-1833  Customer Service - Ordering and Order Status
                         Katey Lambert-Fontaine, VP - Chief Operations Officer

                        Technical Support
352-533-2167  Norm Lambert, President - Technical Support Director 

352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO

352-489-1625   Fax line to all Departments

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks
We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.