Coatings

Product #1 All Purpose Coating - a 100% solids epoxy Hi-Build epoxy coating used for high foot and light forklift traffic areas where abrasion resistance is required; for protection against mild corrosion; and as a decorative waterproof coating for walls, floors, tanks, etc Available in normal, fast, and Cold Temperature Cure versions.

Product #1Fast - Shorter Potlife, and faster setting version of Product #1

Product #1Cold Temperature Cure - This is a version of Product #1 that sets even faster than Product#1 Fast.  Typically used in colder temperatures, or where an very fast cure is required.

Product #1W a two component, 100% solids epoxy Hi-Build epoxy coating used for high indoor traffic areas where abrasion resistance is required; for protection against mild corrosion; and as a decorative waterproof coating for walls, tanks, etc.

Product #2 Chemical Resistant Coating - a two component, 100% solids epoxy chemical resistant coating used to protect chemical concrete, steel and other structural materials from non-oxidizing acids and alkalines for both interior and exterior applications. Available in normal, fast, and Cold Temperature Cure.

Product #2 Fast - Shorter Potlife, and faster setting version of Product #2

Product #2 Cold Temperature Cure - This is a version of that sets even faster than Product#2 Fast.  Typically used in colder temperatures, or where an very fast cure is required.

Product #2W a two component, 100% solids epoxy chemical resistant coating used to protect chemical concrete, steel and other structural materials from non-oxidizing acids and alkalines for both interior and exterior applications.

Product #204 Cold Temperature Cure Polymeric Coating - is a specially formulated coating for cold temperature applications. Able to cure at temperatures as low as 35 degrees �F. It is often used in coolers and food preparation areas that require constant low temperatures. It is also frequently used in room temperature applications to meet super-fast cure, limited shutdown needs.

Product #214 Tabletop Resin - an all-purpose, low viscosity Epoxy System for coating wooden counter tops, tabletops, bar tops and similar applications. It forms a glossy, hard surface, which is resistant to stains. It has excellent clarity and color retention. It is essentially odorless and can therefore be used in occupied areas

Product #630 Novolac Coating/Mortar Binder

Product #632 Novolac Control Joint Filler  is a 100% solids flexible Novolac epoxy Chemical Resistant joint filler for saw-cut joints of concrete slabs on grade.

Product #633 Novolac Coating

Product #671 Conductive Primer/Sealer - Epoxy.com Product #671 is a low viscosity, two component, carbon filled, polyamide modified conductive primer/sealer formulated with special wetting agents to provide maximum penetration into concrete surfaces. Product #671 is ideal for both new and old concrete surfaces. Product #671 provides excellent resistance to wear, and can be used either alone or as a conductive sealer or as a conductive primer when used with Epoxy.com product #674 Electro-Static Dissipating Urethane Topcoat and Epoxy.com Conductive Systems.

Elastomeric Coatings and Membranes

Epoxy.com has a wide variety of elastomeric (flexible) systems for many applications.  These elastomeric systems may be made from epoxy, high tech polyurethanes, or other materials.  The elastomeric properties may be required for many reasons.  Some of these reasons are: waterproofing, joint filling, mechanical and thermal shock absorption.

 

Product #402 Urethane - a two component1 chemical resistant polyurethane coating. The high gloss finish offers excellent abrasion resistance, chemical and stain resistance, and color retention. It used equally well on vertical or horizontal surfaces. It is ideal for concrete floors and walls in warehouses, storage facilities, aircraft hangers, animal housing, and vehicle maintenance facilities.

Flex Epoxy- Epoxy Membrane - a flexible resin used as an epoxy membrane and as a flexible epoxy mortar. It is a two component, 100% solids epoxy used as a base in many  Flexible Epoxy Floor and Mortar Systems. It resists cracking caused by horizontal substrate movement, providing a crack resistant, resilient, sound absorbent, waterproof, durable floor. It offers stress-relieving properties for floor slabs that show movement or vibration. It is excellent for use in areas such as mechanical equipment rooms, large animal rooms and activity centers.

See also:

 


Hit Counter