---

Epoxy.com Product #17 Stone Overlay

Material Calculator

---

Each stone used for epoxy stone overlays will give you slightly different results. The cleaner the stone, the less epoxy that will be required. If the stone is dusty, more resin will be required. Stone with a lot of flat surfaces that interface with each other well, may require less resin than a very round stone that has small surfaces that touch each other. This calculator is designed to give you quick "Rules of Thumb" to help you do quick estimating.  Be sure to test Epoxy.com Product #17 with your stone to verify dosing.  The dosing that this calculator is based on is 1.25 gallon of mixed epoxy resin and hardener for each 150 lbs of stone. This is a little more resin than is necessary for most well graded, clean dry stone.

To get the yield please provide the following:

Square feet to be covered in epoxy stone overlay                  <- Must be a number 1 or larger

Thickness of Epoxy.com stone overlay in decimal Inches:       <-Must be a number .01 or larger

Weight of 1 gallon of Weight of 1 gallon of the stone to be used:    <- Must be number between 1 and 20
Average weight per gallon is typically about 11 to 12 lbs. Put your stone in a 1 gallon can and careful weigh it.

This calculator is for estimating and double checking your own estimates. Although Epoxy.com believes these calculators are accurate, we offer it as is and do not guarantee its accuracy.  The quantities shown are based on theoretical coverage.  Your job and site conditions may require more material. As always contact Epoxy.com Technical Support with your questions.

Secure Login