Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980
[Contact Us]

Chemical Resistant Epoxy Coating

Protect Concrete, Steel & Other Materials From Non-Oxidizing Acids & Alkalines

100% solids zero VOC - meets even the toughest low VOC standards

Product #2 Chemical Resistant Coating


GENERAL DESCRIPTION

Chemical Resistant Epoxy Coating Product #2 is a two component, 100% solids, Zero "0" VOC epoxy chemical resistant coating used to protect chemical concrete, steel and other structural materials from non-oxidizing acids and alkalines for both interior and exterior applications.

APPLICATIONS

Typical Uses

  • Aisle Ways
  • Assembly Plants
  • Bakeries
  • Basement Floors & Walls
  • Block Walls
  • Bottling Plants
  • Break Rooms
  • Cafeterias
  • Canning Plants
  • Car Washes
  • Cells
  • Chemical Processing Areas
  • Chemical Pump Areas
  • Chemical Storage Area
  • Church Floors
  • Classroom Floors
  • Corridors
  • Educational Facilities
  • Entrances
  • Filters
  • Food Plants
  • Fork Lift Areas
  • Health Care Facilities
  • Hospitals
  • Kennels
  • Kitchens
  • Laboratories
  • Law Enforcement Facilities
  • Laundries
  • Leveling concrete
  • Loading docks
  • Locker Rooms
  • Machine Shops
  • Manufacturing Areas
  • Marine Surfaces
  • Meat Preparation Areas
  • Mortuaries
  • Nuclear Plant Floors
  • Offices
  • Patching concrete
  • Photography Processing Areas
  • Power Plants
  • Printing Plants
  • Produce Preparation Areas
  • Pools
  • Ramps
  • Research Facilities
  • Rest Rooms
  • Restaurants
  • Secondary Chemical Containment
  • Semiconductor Plants
  • Sewer Plants
  • Shops
  • Shopping Centers
  • Shower Rooms
  • Stores
  • Show Rooms
  • Supermarkets
  • Tanks
  • Veterinary Facilities
  • Water Plants
  • Warehouses
  • & many others

ADVANTAGE

  • Excellent chemical resistance
  • Strong yet resilient
  • Built in flexibility
  • Sprayable
  • Meets USDA standards
  • 100% Solids - 0.0 lbs VOC

SURFACE PREPARATION

Surface to receive  Product #2 Chemical Resistant Epoxy Coating must be clean and sound. Remove all dirt, laitance, grease curing compounds and other foreign matter by sandblasting, or mechanical abrasion. Remove water and dust from all surfaces with an oil free blast immediately prior to application. See Epoxy.com' Surface Preparation Guide form more details.

MIXING INSTRUCTIONS FOR EPOXY #2

Temperature of Product #2 Chemical Resistant Epoxy Floor Coating  must be 50° F or above at time of mixing. Stir each component separately before blending. Mix two parts by volume of Part A with one part by volume of Part B for three minutes with a low speed electric drill motor equipped with a mixing paddle.

APPLICATION PROCEDURES FOR EPOXY #2

Epoxy Primer Product #899 (or for a more chemical resistant primer Product #12) is recommended for concrete surfaces. Apply  with a roller, brush, or spray equipment. Two coats are recommended. Thickness per coat should be 7-10 mils. Seven days cure time is required to reach maximum chemical resistance.  For more information before installing please see Epoxy.com  installation tips at https://www.epoxy.com/install.htm.

LIMITATIONS - CHEMICAL RESISTANT COATING #2

Refer to Product #2 Chemical Resistance Chart for field tested results of common industrial chemicals that Product #2 has been exposed to. New concrete should be at least 28 days old. Temperature of substrate must be above 50° F. DO NOT thin.

SAFETY PRECAUTIONS

Prolonged or repeated exposure may cause eye and skin irritation. If contact occurs, wash immediately and seek medical help. Use safety glasses with side shields and wear protective rubber gloves.

CLEANING

All tools and equipment should be cleaned before the system gels. Use MEK, Acetone, or any lacquer solvent.

APPLICATION PROPERTIES at 77° F

Mix Ratio 2:1 By Volume
Viscosity (mixed) 1800 CPS
Pot Life (200 gr.) 40 minutes
Tack Free to Touch 6-8 Hours
Initial Cure 24 Hours
Final Cure 7 Days
Packaging (unit size) 3 gal., 15 gal.
Standard Colors Black, White, & Colors Listed Below  

Color Chart HereClick the picture of color card for a larger version of this picture of the color chart.
Please note:  The picture to the right is a photographic reproduction of the color card for this product.  The photo reproduction process and your monitor and/or printer will change these colors.  This chart is to give you an idea of the colors available and not intended for critical color selections.

TENSILE PROPERTIES

Tensile Strength (ASTM D-638) 5500 p.s.i. min.
Elongation 10%

Chemical Resistance

See the Chemical Resistance Chart for Chemical Resistant Epoxy Coating Product #2  set side by side with other commonly used Epoxy.com Coating Systems.

Other customers who visited this page also visited:

See Epoxy Coatings Calculator or use the table below

Material Required Per 1000 SF

Good SF/ Gal Thickness in Mils Gallons 
1 Coat 899 Primer Pigmented 250 6.4 4
1 Coat of 1 Pigmented 200 8 5
Total  14.4
Better than Good
1 Coat 899 Primer Pigmented 250 6.4 4
1 Coat of 1 Pigmented 160 10 6.25
Total  16.4
Much Better
1 Coat 899 Primer Clear 250 6.4 4
1 Coat of 1 Pigmented 200 8 5
2nd Coat of 1 Pigmented 200 8 5
Total  22.4
Best
1 Coat 899 Primer Clear 250 6.4 4
1 Coat of 1 Pigmented 160 10 6.25
2nd Coat of 1 Pigmented 160 10 6.25
Total 26.4

Proper mixing and installation is critical to the optimal success of all products.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
A Vermont Corporation
USA

We have products that have passed the test of time as well as the best new Systems available today.

Since 1980 - 40 years of the highest quality products

Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time)

Closed for lunch from 12Noon to 1PM


321-206-1833  Customer Service - Ordering and Order Status
                         Katey Lambert-Fontaine, VP - Chief Operations Officer
                         sales@epoxy.com

                        Technical Support
352-533-2167  Norm Lambert, President - Technical Support Director 
                         info@epoxy.com

352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO

Copyright © 1994-2023 (providing online information about the right product for the right job for nearly 30 years)  EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks
We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.