Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980
[Contact Us]

Epoxy Seamless Flooring Systems


The epoxy other resins that we have listed below are specifically designed for seamless flooring systems. Epoxy.com 100% Solids Epoxy Coatings can also be used in conjunction with broadcast aggregates to create highly durable seamless epoxy flooring systems as well.

Highly Durable Decorative Seamless Flooring

Multi-Colored Floors

Chemical Resistant  Seamless Epoxy Quartz Flooring Resin - Product #15   is a two component, seamless 100% solids epoxy resurfacing system with High Chemical Resistance. Epoxy.com Product #15 Chemical Resistant Epoxy Quartz Flooring System may be applied as a coating, or combined with silica sand or Epoxy.com multi-colored quartz aggregate to produce a durable, easy to maintain floor, on both new and old surfaces. Epoxy.com Product #15 Epoxy Quartz Chemical Resistant Flooring Resin has superior clarity and UV stability. Epoxy.com Chemical Resistant Seamless Epoxy Quartz Flooring System contains no solvent, so it is "0" VOC with little or no odor.  Epoxy.com Product #15 Epoxy Quartz Chemical Resistant Flooring System, has superior UV stability and clarity.  That means when you use this product your Seamless Epoxy Quartz Flooring System can give you decades of highly attractive, durable service.

Epoxy Chip Flooring Product #315  is a seamless, plural component, liquid applied, 100% solids polymeric colored flake floor resurfacing system with superior wear, and chemical resistance. Epoxy Chip Flooring Product #315 with "multi-colored" flakes produces a durable, easy to maintain floor, on both new and old surfaces.  

Epoxy Coating and Base Coat Product #315BC  for the  315Chip Flooring System. It can also be used as a stand alone coating. If Epoxy.com Product #315BC is used as a stand alone coating over concrete, it is recommended that you first prime with Epoxy Primer Product #899 .

Epoxy Coating and Base Coat Product #315BC Fast  -  Same as Product #315BC for the 315Chip Flooring System, but with a fast cure. An excellent choice for a faster installation of  Seamless Flooring Systems.

Epoxy Coating and Base Coat  Product #315BC-Cold  Similar to Product #315BC Polymeric Coating for  Base Coat for the 315Chip Flooring System, but with a cold temperature cure. The best choice when you need the fastest possible turn around time when installing seamless resinous flooring systems.

Solid Colored Floors

  • Epoxy Systems Product #10  a 100% solids Lo-Mod Low Viscosity adhesive used as a binder for epoxy mortar systems in patching and grouting applications, as a seal coat for non-skid surfaces outside, and as a primer to insure high bond strength for coatings and patches. Typically as a seamless epoxy flooring system it is pigmented.  When used as a seamless epoxy flooring the double broadcast system or it can be used as a troweled seamless epoxy flooring system.
  • Epoxy.com Product #10  Fast Curing Version of the Product #10 Troweled or Broadcast Seamless Epoxy Flooring System.
  • Epoxy.com Product #10  Cold Temperature Curing Version of the Product #10 Troweled or Broadcast Seamless Epoxy Flooring System.
  • Epoxy.com Product # 24 Pigmented Mortar is a multipurpose colored epoxy binder for Epoxy.com Mortar Systems This all purpose epoxy resin is characterized as an excellent general purpose material with good clarity and color retention. It is essentially odorless and can therefore be used in occupied areas. The Epoxy.com Product #24 Pigmented Mortar can be installed as a double broadcast seamless epoxy flooring system.  The Product #24 Pigmented Mortar can also be used as a troweled down seamless epoxy flooring system.
  • Epoxy.com Product #24 Fast Pigmented Mortar  Fast Cure - Seamless Floor cures about twice as fast as the standard cure Epoxy.com Product #24 Seamless Epoxy Flooring System. This fast setting seamless epoxy flooring resin comes at the cost of a shorter potlife (time you have to use the product after it is mixed).  The potlife is only about half that of the standard Product #24 seamless epoxy floor.
  • Epoxy.com Product #24 Cold  Pigmented Mortar Cold Temperature Cure cures about twice as fast as the fast cure Epoxy.com Product #24 Seamless Epoxy Flooring System at room temperature. It ca can also be used in temperatures as low 35° F. This ultra fast setting seamless epoxy flooring resin comes at the cost of an even shorter potlife. The potlife is only about half that of the Fast Cure Product #24 seamless epoxy floor.
  • Epoxy.com Product #28 Epoxy Mortar Resin and Seamless Epoxy Flooring Resin - Honey Clear Mortar 4:1 Ratio a multipurpose colored epoxy binder for Epoxy.com Mortar Systems This all purpose epoxy resin is characterized as an excellent general purpose material with good clarity and color retention. It is essentially odorless and can therefore be used in occupied areas.
  • Epoxy.com Product #29 Cold Temperature Cure Mortar and Seamless Epoxy Flooring System   is a specially formulated binder for cold temperature applications. Able to cure at temperatures as low as 35°F. They are often used in coolers and food preparation areas that require constant low temperatures. Product #29 Cold Temperature Cure seamless epoxy flooring system is also frequently used in room temperature applications to meet super-fast cure, limited shutdown needs. This ultra fast setting seamless epoxy flooring resin comes at the cost of a very short potlife. The potlife is only about ¼ of  that of the  Product #28 seamless epoxy floor resin system.

Mortars for Floor Patching

  • Product #10 Epoxy Mortar a 100% solids Lo-Mod Low Viscosity adhesive used as a binder for epoxy mortar systems in patching and grouting applications, as a seal coat for non-skid surfaces outside, and as a primer to insure high bond strength for coatings and patches. Typically as a seamless epoxy flooring system it is pigmented.  When used as a seamless epoxy flooring the double broadcast system or it can be used as a troweled seamless epoxy flooring system.

Membranes for Crack Isolation

Ultra Flat Floor Leveling Epoxy

  • Epoxy.com Product #214 -  This material was originally designed as a bar top and casting resin, but has been used where super flat floors are required. It has been used in clean rooms, network television studios, stages and dance floors. Product #214 is  an all-purpose, low viscosity Epoxy System that forms a glossy, hard surface, which is resistant to stains. Epoxy.com Product #214 Tabletop Resin has excellent clarity and color retention. It is essentially odorless and can therefore be used in occupied areas

100% Solids Tile Grout Adhesive

Chemical Resistant Flooring

  • Epoxy.com Product #629 Chemical Resistant Conductive Epoxy Seamless  Flooring is a 100% solids epoxy Novolac Conductive coating ideal for severe chemical and solvent storage requiring conductive and spark proof surfaces. Applied at a nominal 1/16 inch, the Epoxy.com Product #629 Chemical Resistant Conductive Seamless Floor Resin System offers the superior chemical resistance of a Novolac Epoxy Resin System while maintaining a conductive surface.
  • Epoxy.com Product #630 Novolac Coating/Mortar Binder - a 100% solids epoxy Novolac ideal for harsh chemical and solvent resistant applications. It is ideal for use as a troweled mortar, slurry binder, and coating for concrete and steel in extremely corrosive areas where resistance to 98% sulfuric acid or other strong caustics is needed. Epoxy.com Product #630 Novolac Coating/Mortar Binder is ideal for use as a protective coating for concrete and steel in the extremely corrosive areas of chemical plants and pulp mills secondary containment areas, water and waste treatment, and gas and electric utilities. The low viscosity of this material makes it an excellent choice for a troweled down chemical resistant seamless epoxy flooring resin system. It also makes an excellent double broadcast chemical resistant Novolac epoxy seamless floor resin system.
  • Epoxy.com Product #633 Novolac Coating is a 100% solids epoxy Novolac coating ideal for harsh chemical and solvent resistant applications. It is used in secondary containment, solvent storage, pump pads, trenches, and other high exposure areas. It is ideal for use as a protective coating for concrete and steel in the extremely corrosive areas of chemical plants and pulp mills secondary containment areas, water and waste treatment, and gas and electric utilities. Epoxy.com Product #633 Novolac Coating is commonly used as a seal coat for Epoxy.com MORTAR SYSTEMS where chemical resistant performance is required.  Product #633 Novolac Epoxy Resin Coating System is slightly more chemical resistant than Epoxy.com Product #630 Seamless Epoxy Novolac Flooring Resin.  That makes Epoxy.com Product #633 Novolac Epoxy Coating resin an excellent top coating for Epoxy.com Product #630, or any other Epoxy.com Seamless Epoxy Flooring System requiring Epoxy.com Product #633's high chemical resistance. Product #633 also makes an excellent double broadcast chemical resistant Novolac seamless epoxy flooring system.

High Temperature

  • Epoxy.com Product #670 Vinyl Ester General Purpose is formulated from a vinyl ester, low viscosity resin of 100% reactive solids in a composite with inorganic fiber reinforcement. It provides the ultimate in chemically resistant properties to prevent deterioration where reactive chemicals exist. Epoxy.com Product #670 Vinyl Ester is the best choice for a seamless flooring system when there will be a prolonged exposure of few chemicals like concentrated: Acetic Acid84%, Citric Acid 40%, and nitric acid 30%,

Conductive & Electrostatic Dissipative Flooring Systems

Other Epoxy and Resin Systems for Seamless Floors

 

Proper mixing and installation is critical to the optimal success of all products.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
A Vermont Corporation
USA

We have products that have passed the test of time as well as the best new Systems available today.

Since 1980 - 40 years of the highest quality products

Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time)

Closed for lunch from 12Noon to 1PM


321-206-1833  Customer Service - Ordering and Order Status
                         Katey Lambert-Fontaine, VP - Chief Operations Officer
                         sales@epoxy.com

                        Technical Support
352-533-2167  Norm Lambert, President - Technical Support Director 
                         info@epoxy.com

352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO

Copyright © 1994-2023 (providing online information about the right product for the right job for nearly 30 years)  EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks
We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.