Epoxy Polyurethane Polyester MMA - Methyl Methacrylate, other Resin Systems Over 350 Products Since 1980 Contact Us

Epoxy.com Product #29

Cold Temperature Cure Epoxy Mortar Binder


DESCRIPTION

Epoxy.com Product #29 Cold Temperature Cure EPOXY MORTAR RESIN is a specially formulated binder for cold temperature applications. Able to cure at temperatures as low as 35°F. They are often used in coolers and food preparation areas that require constant low temperatures. Product #29 Cold Temperature Cure EPOXY MORTAR is also frequently used in room temperature applications to meet super-fast cure, limited shutdown needs.

ADVANTAGES

  • Low temperature cure
  • Low odor during application and cure--will not taint foods
  • Superior stain and chemical resistance
  • Bonds well to cool, damp substrates

CONSIDERATIONS

  • Substrate temperature must be a minimum of 35°F
  • Substrate must be free of dirt, waxes, curing agents, and other foreign materials

COMPOSITION

100% Solids Epoxy Resins, Epoxy Hardeners and Fillers

APPLICATION

SURFACE PREPARATION

Surface Preparation is the most critical portion of any successful resinous flooring system application. All substrates must be properly prepared. For more information, Contact Epoxy.com Technical Service Department.

INSTALLATION

Installation of Epoxy.com Product #29 Cold Temperature Cure Polymeric Mortar Resin varies with your application needs. Contact Epoxy.com Technical Support Department for more details.

CLEAN UP

Clean skin with soap and water. Tools and equipment should be cleaned with xylene or lacquer thinner.

COVERAGE

Epoxy.com Product #29 Cold Temperature Cure BINDER coverage varies with application method. Contact Epoxy.com Technical Support Department for estimating support.

COLOR SELECTION

Light Grey, Sand, Old Gold, Mocha, Brick Red, Taupe, Dark Grey, Slate Blue, Colonial Green, Charcoal, Caramel, Gem Grey, White Sand, White, and Black. Safety Yellow, Deep Blue, Ivy, and Honey Clear.  Custom colors available at an additional charge.

TECHNICAL DATA

Viscosity @ 75°F  1,000 cps
Mixing Ratio 2 Parts A to 1 Part B by Volume
Solids Content 100%, by volume
Volatile Organic Content (VOC) 0
Weight per gallon 10.0-11.5 pounds per gallon, mixed

CURE/DRY TIME

Pot Life 15 minutes @ 75°F
Dry to Touch 2-3 hours @ 75°F; 14-16 hours @ 35°F
Re-Coat 3-4 hours @ 75°F; 14-16 hours @ 35°F
Light Traffic 5-6 hours @ 75°F; 24 hours @ 35°F
Full Cure & Maximum Resistance 5 days

 

For more information please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Hundreds of Systems ,
Since 1980 - Over 33 years
Florida & Vermont
USA


Customer and Technical Support Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time) .
Closed 12 Noon-1PM Eastern Time for Lunch

321-206-1833  Customer Service - Ordering and Order Status
                         Katey Fontaine, VP - Customer Service Director
                         sales@epoxy.com

                        Technical Support
352-533-2167  Norm Lambert, President - Technical Support Director 
                         info@epoxy.com

352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO
                         office@epoxy.com

352-489-1625   Fax line to all Departments

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.

Copyright © 1994-2015 EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.