Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980
[Contact Us]

Hi-Build Epoxy Coating

100% Solids Zero VOC Epoxy Coating

 Epoxy.com Product #1


GENERAL DESCRIPTION

Epoxy Coating sprayed on water tank - Epoxy.com Product #1 -  LEFT CLICK to view larger picture.

Epoxy.com Product #1 All Purpose Epoxy Coating in a Burlington, Vermont Water Plant

Product #1 All Purpose Epoxy Floor and Tank Coating a two component, industrial strength zero (0) VOC, 100% solids epoxy Hi-Build epoxy coating used  to coat concrete, steal and most common construction materials. Excellent for use in high foot traffic and light  to moderate  forklift traffic areas where abrasion resistance is required; for protection against mild corrosion and as a decorative waterproof coating for walls, floors, tanks, etc. It can be broadcast with appropriate silica sand (contact Epoxy.com Technical Support for a recommendation), to create a thicker flooring system in high abrasion situations.

ADVANTAGES

  • Moisture Insensitive
  • Ceramic like finish
  • Industrial Strength
  • Sprayable
  • Solvent Free - 0.0 lbs VOC
  • Waterproof
  • Extremely Durable
  • Chemical Resistant

SURFACE PREPARATION

Epoxy.com Product #1 All Purpose Epoxy Coating, over a wooden wall

Epoxy.com Product #1 All Purpose Epoxy Coating on Plywood walls and Floors. Installation and Picture by: Suwannee River Rendezvous Resort & Campground

Surface to receive free Product #1 - 100% Solids, VOC All Purpose Epoxy Floor  and Tank Coating, must be clean and  sound. Remove all dirt, laitance, grease curing compounds and other foreign matter by sandblasting, or mechanical abrasion. Remove water and dust from all surfaces with an oil free blast immediately prior to application. See Epoxy.com Surface Preparation Guide form more details.

MIXING INSTRUCTIONS

Temperature of Product #1 - 100% Solids, VOC All Purpose Epoxy Floor Coating, must be 50 °F or above at time of mixing. Stir each component separately before blending. Mix two parts by volume of Part A with one part by volume of Part  B for three minutes with a low speed electric drill motor equipped with a mixing paddle. 

APPLICATION

Epoxy Primer Product #899 (or for a more chemical resistant primer Product #12) is recommended for concrete surfaces. Allow primer to cure until it is tack-free. Then apply Product #1 - 100% Solids, VOC All Purpose Epoxy Floor and Epoxy Coating, with a roller, brush, or spray equipment.  Two coats are recommended. Apply at a rate of 160 to 200 SF Per gallon per coat (8-10 mils) with 2 coats recommended. Seven days cure time is required to reach maximum chemical resistance. For more information before installing please see installation tips.

LIMITATIONS

DO NOT apply at temperatures below 50° F.  Surface must  be dry.

Epoxy Coating on Roof of Water Tank / Floor of Pump Room.  Epoxy.com Product #1

Product #1 All Purpose Epoxy Coating on the floor of Tri-Town Water District (Vermont) Floor

SAFETY PRECAUTION

Prolonged or repeated exposure may cause eye and skin irritation. If contact occurs, wash immediately and seek medical help. Use safety glasses with side shields and wear protective rubber gloves.

CLEANING

All tools and equipment should be cleaned before the system gels. Use MEK, Acetone, or any lacquer solvent

APPLICATION PROPERTIES @77° F

Mix Ratio  2:1 By Volume
Viscosity (mixed) 950 CPS
Pot Life (200 gr.) in minutes @70° F. 30-40 (normal cure)
VOC Content"0.0" (zero)
Recommended Application Rate 160-200 SF per gallon per coat
Set Time in Hours @ 70°F. 10-12 (normal cure)
Initial Cure 24 Hours
Final Cure 5 Days
Packaging Unit Size 3 gal. 15 gal.
Standard Colors See Color Chart
Typical Coefficient of Friction-Rubber Shoe Surface with Epoxy.com Product # 50 Anti-skid Fine Non-Skid Added ASTM F-489
     Static Friction w/ Saltwater Solutions on surface 0.90-0.97
     Static Friction w/ oil on Surface 0.72-0.75
     Sliding Friction w/ Saltwater Solution on Surface 0.87-.090

Epoxy.com Epoxy Color Chart HereClick the picture of color card at the side for a larger version of this picture of the color chart.
Please note:  The picture to the right is a photographic reproduction of the color card for this product.  The photo reproduction process and your monitor and/or printer will change these colors.  This chart is to give you an idea of the colors available and not intended for critical color selections.

Material Certification of LEED Requirements

Epoxy.com a division of Epoxy Systems, Inc. certifies that Product #1 - 100% Solids, VOC All Purpose Epoxy Coating, meets or exceed LEED requirements as summarized below:

LEED Credit IE 4.2:

Indoor Environmental Quality/Air Quality Before Occupancy Materials meet the requirement for VOC content Pertaining to LEED IEQ 402 Indoor Emitting Materials Credit. Refer to the individual product component technical data sheets and MSDS for further information.

Epoxy Coating Installation Guide

Epoxy Coatings Calculator

Other customers who visited this page also visited:

Proper mixing and installation is critical to the optimal success of all products.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
A Vermont Corporation
USA

We have products that have passed the test of time as well as the best new Systems available today.

Since 1980 - 40 years of the highest quality products

Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time)

Closed for lunch from 12Noon to 1PM


321-206-1833  Customer Service - Ordering and Order Status
                         Katey Lambert-Fontaine, VP - Chief Operations Officer
                         sales@epoxy.com

                        Technical Support
352-533-2167  Norm Lambert, President - Technical Support Director 
                         info@epoxy.com

352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO

Copyright © 1994-2023 (providing online information about the right product for the right job for nearly 30 years)  EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks
We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.