Clear Epoxy over Reclaimed Wood

Epoxy Product #15 on Reclaimed Wooden Floor

The floor shown in the photos was installed in a dining room. Approximate room size was 12' x 14'.  The lumber was 8" - 12" in width and 3/4" thick. Tongue and groove edges were routed on the boards. 6 gallons of epoxy were layered on in 7-8 applications. Epoxy was applied with 3/8" and 1/4" nap rollers. The final finish was not completely smooth like a table top due to cupping in some of the boards. The boards were bonded together because he cut heating vents in and the cut-outs came out as one solid piece and stayed together rather than separating back into the individual boards. The baseboard was also made out of old lumber. The top edge was rounded and then stained so the machined edge would appear weathered. 3-4 coats of epoxy were applied so it is much rougher. The owner was definitely pleased with the results. Photos & Job Description Courtesy of: Karl Fleming Copyright 2012 - All Rights Reserved See larger versions of the pictures on this page.

Rough Cut Reclaimed Barn board floor, before clear epoxy coating. Click the picture above to see a larger Version of this picture.

Rough Cut Reclaimed Barn board floor, after clear epoxy coating. Click the picture above to see a larger Version of this picture.

Proper mixing and installation is critical to the optimal success of all products.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
A Vermont Corporation
USA

We have products that have passed the test of time as well as the best new Systems available today.

Since 1980 - 40 years of the highest quality products

Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time)

Closed for lunch from 12Noon to 1PM

321-206-1833  Customer Service - Ordering and Order Status
                         Katey Lambert-Fontaine, VP - Chief Operations Officer
                         sales@epoxy.com

                        Technical Support
352-533-2167  Norm Lambert, President - Technical Support Director 
                         info@epoxy.com

352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO

Copyright © 1994-2023 (providing online information about the right product for the right job for nearly 30 years)  EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.

• Home
• Sales Terms
• MSDS &Tech Data
  • Product Catalog
  • Tech Data (TDS) in Acrobat Format
  • Safety Data Sheets (MSDS/SDS)
• Online Ordering Authorization Form
• Add this page to Favorites