Water Cleanable Epoxy Tile Grout Resin
Epoxy.com Product #224
Epoxy.com PRODUCT #224 is a user friendly, water
cleanable, 100% solids epoxy grout and adhesive. Used for grouting ceramic tile,
brick pavers, and stone, Epoxy.com’ PRODUCT #224 is supplied in pre-packaged
kits containing resin, hardener, that when mixed with the proper fillers produce
a dense, uniform seal. Typical applications for Epoxy.com PRODUCT #224 require
resistance to thermal shock, chemicals, and heavy traffic including meat
packers, breweries, canneries, bottlers, CIP areas, and pharmaceutical
formulators. Please note: Fillers are not included in this product.
For a complete product including fillers use Epoxy.com Product #225
Tile Grout + Adhesive with Filler.
- User Friendly Packaging
- Low Odor for use in Occupied Areas
- Meets ANSI A-118.3 Specification for Chemical Resistant, Water Cleanable Epoxy Grout
- Available with Cold-Room Hardener
- Low Viscosity-good wetting properties
- Versatile--for both Setting and Grouting all Types of Tile
- USDA Approvable
Surface Preparation is the most critical portion of any
successful resinous flooring system application. Work must be performed by
trained or experienced contractors or maintenance personnel. Epoxy.com service department is pleased to answer any questions. Before grouting, clean
joints and the tile surface with a damp sponge to remove dust, dirt, and other
contaminants. Do not leave water standing in joints. Do not clean tiles with
Countertops by Porter
Empty entire contents of Part A and Part B into a clean
mixing pail. With a slow speed drill or margin trowel, mix until liquids are
completely blended. Add at least ¾ of the TILE GROUT FILLER (more for wide
joints) and blend until uniform.
- Substrate must be free of dirt, waxes, curing agents, and other foreign
Protect from exposure to chemicals and harsh cleaners until fully cured.
- Substrate temperature must be a minimum of 50°F-Contact Epoxy.com for Low Temperature Cure
Pour mixed Epoxy.com PRODUCT #224 onto working area.
Following standard epoxy and grouting techniques, apply to surface. Be sure all
grouted joints are completely filled. Remove excess grout with grout float. Do
not leave excess grout on face of tiles. For complete installation instructions,
contact Epoxy.com Technical Service.
Some tiles and pavers can be stained by color pigments in
Epoxy.com PRODUCT #224. Try small area to determine results before grouting
Clean skin with soap and water. Tools and equipment should be
cleaned with xylene or lacquer thinner. Consult Material Safety Data for safety
and health precautions.
100% Solids Epoxy Adhesive and Grout Fillers
||2,000 to 2,500
||3,800 to 4,100
|Bond Strength to
||6-7 hours @ 75°F
|Full Set Time
|Full Cure &
Photo by: Countertops
After completing the application of Epoxy.com PRODUCT #224, the installer
should provide the owner with maintenance instructions. If floors become
slippery due to animal fats, oil, grease, or soap film, clean and rinse
Epoxy.com PRODUCT #224 is easily cleaned with neutral soaps or
Epoxy.com PRODUCT #224 is available in Clear, Black, White and the colors
on the cart below. Custom
colors are available subject to laboratory approval, minimum quantity, lead time
for production, and increased cost.
Click the picture
of color card at the side for a larger version of this picture of the
The picture to the right is a photographic reproduction
of the color card for this product. The photo reproduction process and
your monitor and/or printer will change these colors. This chart is to
give you an idea of the colors available and not intended for critical
Proper mixing and installation is critical to the optimal success of all product.
MSDS for more details on our products.
Be sure to contact us with any questions and/or concerns that you have.
For more information please contact:
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Hundreds of Systems,
Since 1980 - 35 years
Florida & Vermont
Customer and Technical Support Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific
Closed 12 Noon-1PM Eastern Time for Lunch
321-206-1833 Customer Service - Ordering and Order Status
Katey Fontaine, VP - Customer Service Director
352-533-2167 Norm Lambert, President - Technical Support Director
352-489-1666 Accounting and Administration
Debby Lambert, CEO, and CFO
352-489-1625 Fax line to all Departments
important hint, tips, tricks, and product information: Visit our Blog, and join us on Facebook and Twitter.
Copyright © 1994-2017 - Epoxy Systems Inc. DBA Epoxy.com - Commercial, Industrial, and Residential Resins Since 1980