Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980
[Contact Us]

Epoxy.com Product #215 LVOC

High Solids Low VOC Coating.


DESCRIPTION:

EPOXY.COM #215 LVOC Epoxy Protective Coating is a two-component, high solids epoxy coating. The material components are Epoxy and high performance polyamide with corrosion inhibitors. It is 100 % reactive. It has a convenient 1:1 mixing ratio by volume and a long pot life to simplify mixing and application.

ADVANTAGES:

When cured, EPOXY.COM #215 LVOC provides a tough, tile-like finish with good flexibility. It protects concrete, steel, or wood against attack by salts, acids and alkalizes and some solvents

PHYSICAL PROPERTIES:

Color Gray
Mix Ratio 1:1 by volume
Volume Solids 68%
Pot Life 4 hours
Min recoat with self 4 hours
Max recoat with self 7 days
Min recoat w/polyurethane 12 hours
Max recoat w/polyurethane 7 days
Weight per gallon 13.5 lbs.
Viscosity

3,000 cps

Drying time at 70°F
To touch 5 hours
To recoat 14 hours
Full cure 7 days
V. O. C. Content 3.2 lbs / gallon
Shelf Life  
Unmixed closed container 12 months

 

SURFACE PREPARATION:

STEEL SURFACES:

New steel surfaces to receive Epoxy.com Product # 215 Low High Solids VOC polyamide coating should be initially blasted to near-white metal surface cleanliness in accordance with SSPC-SP10 for immersion surface or commercial blast cleanliness in accordance with SSPC-SP6 for non-immersion service. Blast profile on steel should be 1.5-2.0 mils in depth and be of a sharp, jagged nature as opposed to “peen” pattern. May be used as an intermediate or finish coat over Epoxy.com #1200 Zinc Rich Primer.

CONCRETE SURFACES:

New concrete shall be cured a minimum of 30 days. Concrete surfaces shall be clean, sound and dry. Abrasive blast to remove curing compounds, existing coatings or laitance prior to application on concrete floors

MIXING:

Combine (1) one part by volume of Component "A" with (1) one part by volume of Component "B" Mix for a minimum of (3) minutes with a low speed electric drill and a Mixing Paddle.

No induction time is needed before applying.

APPLICATION:

EPOXY.COM #215 LVOC Epoxy Protective Coating may be applied by brush, roller or spray. All spray equipment must employ traps to prevent water and oil from contaminating coating.

COVERAGE:

Typical application is 160 sq. ft. per gallon; film thickness will be approximately ten (10) mils wet and eight (8) mils dry. Two coats are recommended.

PACKAGING:

2 gallon and 10 gallon units.

CAUTION:

“A” Component contains epoxy resin.

DANGER! “B” Component contains alkaline amines; strong sensitizer. May cause skin sensitization or other allergic responses. Use with good ventilation, particularly if material is heated or sprayed. Prevent all contact with skin or eyes. Wear protective clothing, goggles, gloves and/or barrier creams. Keep container closed when not in use. Wash thoroughly after handling.

FIRST AID: In case of skin contact, immediately wash with soap and water. In case of eye contact, flush eyes with copious amounts of water for at least fifteen (15) minutes. Remove contaminated clothing and shoes.If irritation persists, seek medical attention. Wash clothing before reuse.

FOR INDUSTRIAL USE ONLY / KEEP AWAY FROM CHILDREN

 Skip Navigation Links

Epoxy.com Home PageExpand Epoxy.com Home Page

Proper mixing and installation is critical to the optimal success of all products.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
A Vermont Corporation
USA

We have products that have passed the test of time as well as the best new Systems available today.

Since 1980 - 40 years of the highest quality products

Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time)

Closed for lunch from 12Noon to 1PM


321-206-1833  Customer Service - Ordering and Order Status
                         Katey Lambert-Fontaine, VP - Chief Operations Officer
                         sales@epoxy.com

                        Technical Support
352-533-2167  Norm Lambert, President - Technical Support Director 
                         info@epoxy.com

352-489-1666  Accounting and Administration
                         Debby Lambert, CEO, and CFO

Copyright © 1994-2023 (providing online information about the right product for the right job for nearly 30 years)  EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks
We accept MasterCard, Visa, American Express, Discover, or Wire Transfers.